Direct contact

You want to contact STOLL directly? Then you are right here. We will be happy to help you. Simply fill in the fields. If you have questions about specific areas, please use the appropriate area fields.







How much is 5 plus 1?
Sitemap    Here you are: Home  › Machines  › CMS 803 HP knit&wear
Deutsch |  English |  中文 |  русский  |  Español
Click for complete view

CMS 803 HP knit&wear

Everything on the CMS 803 HP knit & wear is optimized for the production of basic knit and wear garments. It is equipped with three systems, a working width of 84''/213 cm and offers a
gauge range from E 3,5.2 to E 7.2.

1x3
Pfeil
84" / 213cm
Kamm
E 3,5.2 - 7.2

 

Additional holder for yarn bobbins

Additional holder for yarn bobbins

For suspension on the back of the bobbin board. For 2x4, 2x5 or 2x7 additional bobbins depending on type.

Additional yarn feeders

Additional yarn feeders

Machines with one carriage can utilize up to 32 yarn feeders. Also for coarse or abrasive yarns.

ASCON®

ASCON®  

For measurement of stitch length, controls external influences on yarn consumption.

Front panel for fabric collection chamber

Front panel for fabric collection chamber

Ensures that the fabric does not drop out of the fabric collection chamber.

Keyboard with holder

Keyboard with holder

 Additional input keyboard with space-saving, ergonomically shaped holder.

Plating Kit

Plating Kit

Plating kit consisting of improved plating yarn feeders and special yarn adapter. Colour and quality plating can be realized in better quality using the plating kit.

Storage feed wheel

Storage feed wheel

Stores the yarn and feeds it again for stitch formation under constant yarn tension.

Battery back-up

Battery back-up

Correct continuation of the knitting process after power failure.

Clamping and cutting device

Clamping and cutting device

Automatic thread disposal of up to 16 yarn feeders by eight separate clamping and cutting devices on each side. (Not for all models available).

CMS-needle

CMS-needle

Pelerine spring-transfer needle with spring-loaded latch and conical hook. Ensures tight knitting and high running safety. Very low needle consumption.

Display slide with color monitor

Display slide with color monitor

Practical and clear: colour display 800x600 pixels and touchscreen. Enables to enter machine commands while maintaining eye contact to the fabric. (not for Economy Line models)

Fabric take-down system Stoll-multiflex®

Fabric take-down system Stoll-multiflex®

The take-down system, consisting of a main take-down, upper take-down and take-down comb for fabric starts on empty needles, operates automatically. The roller segments are variably adjustable, and all three take-down components are freely programmable.

Friction feed wheels

Friction feed wheels

These ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads. (Not for all models standard equipment).

Gauge conversion

Gauge conversion/needle exchange

Flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.

Holding-down jacks

Holding-down jacks

High-quality stitch appearances are provided by the proven Stoll holding-down technology.

Knitting system control with flexible stitch and PTS

Knitting system control with flexible stitch and PTS

Dynamic tension setting with step motors. Extremely quick adjustment of stitch tension with PTS (Power Tension Setting). Several stitch tension values within one knitting row.

Main computer

Main computer

256 MB memory.

Main drive

Main drive

Programmable speed with flexible speed adjustment using starting bar. Variable stroke with Power-RCR system (Rapid Carriage Return). Especially useful at short strokes for narrow garments, binding off and narrowing.

Online via Ethernet

Online via Ethernet

With the Ethernet connection CMS-machines from the TC-generation can be connected to standard networks for fast transmission of large quantities of data.

Safety devices

Safety devices

Including fully enclosed and illuminated working area, CFC-protection system (carriage force control) and shock stop motion front/rear. Machine complies with EC-regulations (CE mark).

Stoll-touchcontrol®

Stoll-touchcontrol®

An individual user interface and intuitive menu guidance enables entering pattern changes easily and directly at the machine.

USB ports

USB ports

Standardized and modern: Data input with USB stick.

(for CMS 502 HP+/CMS 502 HP+ multi gauge one USB port).

Yarn Carrier

Yarn Carrier

The 32 yarn carriers in all move independently of the carriage, and are set program-controlled in their horizontal and vertical position. This enables the execution of even more knitting techniques like e.g. inverse plating, intarsia plating and selective plating. The exceptional feature is that a single yarn carrier is used for all knitting techniques. The intarsia, plating or inlay technique can now be produced in one fabric without conversion.

Yarn guidance

Yarn guidance

For top results and high operating safety: an optimum, constant yarn feed due to the system active yarn clamp unit, slack tensioner and permanent thread brake.

Patternshop  |  Customer-Net  |  Press-Net  |  Newsletter  |  Contact  | Print
Imprint  |  Data Privacy & Terms  |  Standard Business Conditions  |  Purchasing Terms and Conditions    ©2018 H. Stoll AG & Co. KG