Direct contact

You want to contact STOLL directly? Then you are right here. We will be happy to help you. Simply fill in the fields. If you have questions about specific areas, please use the appropriate area fields.







How much is 3 plus 3?
Sitemap    Here you are: Home  › Features
Deutsch |  English |  中文 |  русский  |  Español

Features

16 Tracks

16 Tracks

The total of 16 tracks with 2 yarn carriers respectively enables a significantly easier programming of ambitious patterns (using the example of intarsia patterns with a lot of yarn carriers). The corresponding numbering of the rails makes the threading easier. The minimum distance between 2 yarn carriers on the same track could be reduced to 2" for the CMS ADF-3.

2 additional beds

2 additional beds

Racking of the additional beds front/rear: Racking course max. 2"; programmable racking speed.

2 split additional beds

2 split additional beds

The two split additional beds ensure the most efficient narrowing cycles, even with patterns with opposite narrowing lines. With transfer element at the split area. Racking course max. 2".

Battery back-up

Battery back-up

Correct continuation of the knitting process after power failure.

Clamping and cutting device

Clamping and cutting device

Automatic thread disposal of up to 16 yarn feeders by eight separate clamping and cutting devices on each side. (Not for all models available).

Clamping and cutting device 16-fold

Clamping and cutting device 16-fold

Automatic thread disposal of up to 32 yarn feeders by 16 separate clamping and cutting devices on each side. Option (Not available for all models).

Cleaning device

Effiziente Absaugung

A turbine provides for a high suction effect. Thanks to the brush at the suction points and the generously dimensioned lint container, the cleaning device is especially efficient.

CMS-needle

CMS-needle

Pelerine spring-transfer needle with spring-loaded latch and conical hook. Ensures tight knitting and high running safety. Very low needle consumption.

Coupled carriages

Coupled carriages

Quick coupling or uncoupling of carriages for knitting over the full working width or in tandem operation.

Direct yarn guide

Direct yarn guide

The open carriage enables the direct yarn feed with low yarn tensions.

Display slide with color monitor

Display slide with color monitor

Practical and clear: colour display 800x600 pixels and touchscreen. Enables to enter machine commands while maintaining eye contact to the fabric. (not for Economy Line models)

Electronic selection system

Electronic selection system

No moving parts, no wear - that makes the Stoll selection systems maintenance-free and increases running stability. Two selection points for each system in each direction.

Fabric take-down system Stoll-multiflex®

Fabric take-down system Stoll-multiflex®

The take-down system, consisting of a main take-down, upper take-down and take-down comb for fabric starts on empty needles, operates automatically. The roller segments are variably adjustable, and all three take-down components are freely programmable.

Friction feed wheels

Friction feed wheels

These ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads. (Not for all models standard equipment).

Gauge conversion

Gauge conversion/needle exchange

Flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.

Holding-down jacks

Holding-down jacks

High-quality stitch appearances are provided by the proven Stoll holding-down technology.

Holding-down jacks

Holding-down jacks

Spring loaded, adjustable holding-down jacks on both needle beds

Intarsia knitting

Intarsia knitting

Easy and economical preparation of our coarse gauge machines (regardless of gauge, working width and number of systems) for intarsia knitting by simply slipping on the intarsia yarn feeders (option).

Knitting system control with flexible stitch and PTS

Knitting system control with flexible stitch and PTS

Dynamic tension setting with step motors. Extremely quick adjustment of stitch tension with PTS (Power Tension Setting). Several stitch tension values within one knitting row.

Large needle bed racking

Large needle bed racking

The needle bed is equipped with a racking device with a maximum racking course of four inches and a programmable racking speed.

Magnetic thread clamping device

Magnetic thread clamping device

Simple programmable thread clamping device for yarn control.

Main computer

Main computer

256 MB memory.

Main drive

Main drive

Programmable speed with flexible speed adjustment using starting bar. Variable stroke with Power-RCR system (Rapid Carriage Return). Especially useful at short strokes for narrow garments, binding off and narrowing.

Motorized Clamping and Cutting Device for S-machines

2 motorized thread clamping and cutting units (left/right) with 8 independent positions each.

Motorized Clamping and Cutting Device for T-machines

2 motorized thread clamping and cutting units (left/right) with 8 independent positions each.

Needle cam exit

Needle cam exit

Manually controlled, providing a further take-down of the needles during loose knitting operations.

Online via Ethernet

Online via Ethernet

With the Ethernet connection CMS-machines from the TC-generation can be connected to standard networks for fast transmission of large quantities of data.

Presser foot unit

Presser foot unit

With the presser foot unit it is possible to knit and transfer more loosely. And that means knitting is possible with little take-down.

Safety devices

Safety devices

Including fully enclosed and illuminated working area, CFC-protection system (carriage force control) and shock stop motion front/rear. Machine complies with EC-regulations (CE mark).

Simplified threading

Simplified threading

The yarn carriers can be threaded directly from the top to any position, with the threading aid, which is to be found in the box contents.

Sliding bobbin creel

Sliding bobbin creel

The rear sliding creel enables a better and easier access to the rear needle bed.

Stoll-touchcontrol®

Stoll-touchcontrol®

An individual user interface and intuitive menu guidance enables entering pattern changes easily and directly at the machine.

Thread insertion with compressed air

Thread insertion with compressed air

The thread can be blown in during thread insertion by means of an external compressed air supply. (Option)

USB ports

USB ports

Standardized and modern: Data input with USB stick.

(for CMS 502 HP+/CMS 502 HP+ multi gauge one USB port).

V-shaped arranged yarn control unit

V-shaped arranged yarn control unit

The V-shaped arranged yarn control unit maintain a cross-free, direct yarn feeding.

Yarn Carrier

Yarn Carrier

The 32 yarn carriers in all move independently of the carriage, and are set program-controlled in their horizontal and vertical position. This enables the execution of even more knitting techniques like e.g. inverse plating, intarsia plating and selective plating. The exceptional feature is that a single yarn carrier is used for all knitting techniques. The intarsia, plating or inlay technique can now be produced in one fabric without conversion.

Yarn feeder

Yarn feeder

Up to 32 yarn feeders for machines with one carriage possible. Continuous monitoring of all yarn feeder positions avoids collisions.

 

Yarn guidance

Yarn guidance

For top results and high operating safety: an optimum, constant yarn feed due to the system active yarn clamp unit, slack tensioner and permanent thread brake.

Patternshop  |  Customer-Net  |  Press-Net  |  Newsletter  |  Contact  | Print
Imprint  |  Data Privacy & Terms  |  Standard Business Conditions  |  Purchasing Terms and Conditions    ©2017 H. Stoll AG & Co. KG