The quickest access to the world of STOLL. Simply log in with your username and password.
Work safely: encapsulation in the working area, CFC-protection system (carriage Force Control), shock termination front and rear, meeting of all CE guidelines.
For all cases: even after a power failure, you can continue the knitting process with a Stoll machine faultless.
You can connect your CMS via Internet with standard networks for fast transmission of large amounts of data.
Especially convenient and useful: the function order/sequence knitting is programmable too with Stoll-touchcontrol.
Thanks to individual user interface and intuitive menu guidance pattern changes can be achieved easily at the machine directly.
Useful – you have always eye contact with the fabric trough the display slider – and clear: Color display with 800 x 600 pixel and touch screen.
The advantages: Turbine with high suction effect, brush at the extraction points and generously dimensioned lint container.
On both sides arranged clamping and cutting points provide the individual feed of separate yarn carriers.
Free programmable system with main take-down, upper take-down and take-down comb for knitting start with empty needles. The roller segments are variably adjustable.
The needle bed comes with a racking with four inch racking course and programmable racking speed.
knitting 3D patterns with high operational reliability? It is no problem thanks to the proven Stoll holding-down technology.
Dynamic stitch tension setting with step motors: very fast adjusting of stitch tension and multiple stitch tensions in one row.
No moving parts, no wear - the Stoll selection systems are maintenance-free and safe to run. Two selection positions for each system in each direction.
Split-function, three way technique or simultaneous transfer to the front and rear provide optimal system allocation and maximum production output.
Advantages of the pelerine spring-transfer needle with spring-loaded latch: high stitch tension, high operational reliability and small needle-consuming.
These ensure reduced and constant yarn tension: the optimal yarn delivery device for the maximum number of threads.
With improved design and very good handling the yarn control units provide easy yarn insertion and scalable setting of the required parameters.
CMS 822 HP
With the CMS 822 HP you can simultaneously knit two Fully Fashion pieces in the tandem mode with up to 2 x 42"/2 x 107 cm. Coupled carriages enable an enormous working width of up to 84"/213 cm, and as a result extra-large sizes in XXL. If necessary, the machine can be converted to a CMS 822 HP multi gauge or CMS 822 HP knit and wear configuration.
84" / 213 cm
E5 - E18
- Technische Daten (59.04 KB)
2x16 Clamping and cutting points
Individual thread disposal of up to 32 yarn feeders by 16 separate clamping and cutting devices on each side. (Not for models with additional beds as well as CMS 520 C, CMS 830 C knit&wear, CMS 730 S knit&wear and Economy Line).
Additional holder for yarn bobbins
For suspension on the back of the bobbin board. For 2x4, 2x5 or 2x7 additional bobbins depending on type.
Additional yarn control units
Separate knot detectors for small and large knots with scaleable setting of the desired parameters.
Additional yarn feeders
Machines with one carriage can utilize up to 32 yarn feeders. Also for coarse or abrasive yarns.
Front panel for fabric collection chamber
Ensures that the fabric does not drop out of the fabric collection chamber.
Plating kit consisting of improved plating yarn feeders and special yarn adapter. Colour and quality plating can be realized in better quality using the plating kit.
Clamping and cutting device
Automatic thread disposal of up to 16 yarn feeders by eight separate clamping and cutting devices on each side. (Not for all models available).
A turbine provides for a high suction effect. Thanks to the brush at the suction points and the generously dimensioned lint container, the cleaning device is especially efficient.
Pelerine spring-transfer needle with spring-loaded latch and conical hook. Ensures tight knitting and high running safety. Very low needle consumption.
Combined knitting/transfer systems
Independent systems with split function for optimum system allocation and highest production output. Knitting with the three-way technique or simultaneous transfer in both directions.
Quick coupling or uncoupling of carriages for knitting over the full working width or in tandem operation.
Display slide with color monitor
Practical and clear: colour display 800x600 pixels and touchscreen. Enables to enter machine commands while maintaining eye contact to the fabric. (not for Economy Line models)
Electronic selection system
No moving parts, no wear - that makes the Stoll selection systems maintenance-free and increases running stability. Two selection points for each system in each direction.
Fabric take-down system Stoll-multiflex®
The take-down system, consisting of a main take-down, upper take-down and take-down comb for fabric starts on empty needles, operates automatically. The roller segments are variably adjustable, and all three take-down components are freely programmable.
Friction feed wheels
These ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads. (Not for all models standard equipment).
Flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.
High-quality stitch appearances are provided by the proven Stoll holding-down technology.
Easy and economical preparation of our coarse gauge machines (regardless of gauge, working width and number of systems) for intarsia knitting by simply slipping on the intarsia yarn feeders (option).
Knitting system control with flexible stitch and PTS
Dynamic tension setting with step motors. Extremely quick adjustment of stitch tension with PTS (Power Tension Setting). Several stitch tension values within one knitting row.
Large needle bed racking
The needle bed is equipped with a racking device with a maximum racking course of four inches and a programmable racking speed.
Programmable speed with flexible speed adjustment using starting bar. Variable stroke with Power-RCR system (Rapid Carriage Return). Especially useful at short strokes for narrow garments, binding off and narrowing.
Monitoring functions knitting machine
All intelligent sensors, actuators and CPU modules are permanently checked for correct operating mode. Error messages appear as clear text display explained via the integrated help system with remedy proposals.
Monitoring functions knitting routine
Continuous monitoring for perfect functioning of thread line, needles, carriage movement and fabric. Automatic stop in case of a fault.
Online via Ethernet
With the Ethernet connection CMS-machines from the TC-generation can be connected to standard networks for fast transmission of large quantities of data.
Including fully enclosed and illuminated working area, CFC-protection system (carriage force control) and shock stop motion front/rear. Machine complies with EC-regulations (CE mark).
An individual user interface and intuitive menu guidance enables entering pattern changes easily and directly at the machine.
Yarn control units
The yarn control units are characterized by improved design and excellent handling. The consequence: easy thread insertion and scaleable adjustment of the desired parameters. Separate knot detectors for small and large knots.
Up to 32 yarn feeders for machines with one carriage possible. Continuous monitoring of all yarn feeder positions avoids collisions.