ADF Familie

One yarn carrier for all! A single yarn carrier is used for all knitting techniques. Intarsia, Plating or Inlay technique can be produced in one fabric without exchanging yarn carriers.

To asure a cross-free, direct yarn feeding.

Guarantees a maximum degree of safety at work: in case of interruption of the light barrier, for example when intervening, the carriage and the yarn carrier will stop automatically.

Simplified thread-in due the ergonomic ADF yarn carriers the thread-in process is extremely reduced

Vertical and horizontal movement of the yarn carriers enables unimagined pattern and color variations:

The open carriage enables a direct yarn feeding with low yarn tension.

With the Ethernet connection STOLL machines can be connected to standard networks for fast transmission of large quantities of data and remote access to other devices.

The automatic central lubrication supplies the needle bed with the necessary needle oil.

Benefits:
  - to ensure a reliable maintenance and therefore to ensure a reliable daily production. 
  - reduces, optimizes the use of lubricants

The pelerine spring-transfer needle with spring-loaded latch.

Benefits: it is characterized by low needle wear and a high level of safety during opening, closing, and transferring.

It enables different stitch lengths in a single knitting row.

Benefits: faster stitch density changes in the fabric and thus more pattern possibilities.

Split-stitch without the need of exchanging​ cams for all fine gauges available

Benefit: Less interruption times in the production

The needle bed is equipped with a racking device with a maximum racking course of 4" and a programmable racking speed.

Benefits: more pattern possibilities

The 1366x768-pixel wide view color display with multi-touch screen is practical and clear. The individual user interface and intuitive menu guide enable pattern changes to be entered easily and directly on the machine.

Benefits:
  - Improved legibility
  - Better usability with capacitive touch  (faster display reaction)
  - New gestures
  - Due to the possibility to access remotely to other devices (e.g. CREATE PLUS, PPS...), changes can be performed directly at the machine

Optional equipement available in each system to achieve:

Aesthetic weaving effects through:
 •Color and material contrast
 •Woven fabric Look

Functional weaving through:
 •Adding elasticity: Inlay thread with higher elasticity (made of rubber or a texturized multifilament)
 •Reducing extensibility: Inlay thread with lower elasticity
 •Application of melting yarn to stiffen or bond the fabric
 •Weaving in texturized yarn to add cushioning.

STOLL-MULTIFLEX® FABRIC TAKE-DOWN    or   BELT TAKE-DOWN

  - STOLL-multiflex®: main take-down with adjustable roller segments and take-down comb for fabric starts on empty needles in combination with auxiliary take-down operates automatically.

  - Belt take-down: particularly for products with deep gores or with large width variation and special elastic properties. It is offered in combination with comb.

Only in combination with Multiflex take-down

For a better wide fixing effect of the knitting fabric.

Mirror and lighting for the belt take-down and fabrics in the storage area

Benefits: ergonomic solutions for machines with Belt take-down to simplify your daily work during production.

Switch for turning the Belt take-down forwards and backwards:

Benefits: to make knitters' daily work easier and more productive.

With the oil drain container the oil is collected centrally without the need of additional vacuum cleaners or rags to clean the excess oil from the machine.
Consequently, it will be more environmentally friendly.

Individual thread holding and cutting via 8, 12 or 16 clamping and cutting units on each side depending on the quatity of yarn carriers.

Benefits of the individual thread holding and cutting:
- easier and faster pattern programming
- more productivity in some fabrics

For a correct continuation of the knitting process after power failure.

Benefits: less damaged fabrics, less waste, less costs.

Thanks to the easy-to-reach USB port, important data can be transferred to the machine quickly and easily.

Flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.

Communication between high-end feed-wheels  and STOLL-machines through a CAN-Open interface

Pattern creation with simplified development and accelerated programming.

Benefits: Accelerates the entire pattern development workflow.