With gauges E2,5.2, a working width of 84"/213 cm, 3 systems and STOLL-multiflex® take-down, the CMS 830 ki C knit&wear is exactly the right machine for complete or Fully Fasion articles with ultra-coarse stitches, a low yarn consumption and high productivity – even in extra-large sizes.
It is equipped with spring loaded sinkers which garantees a reliable local knitting such as deep gores or pockets.
CMS 830 ki C
for ultra-coarse knit and wear gauges with hand-knit appearance and deep gores
SPRING LOADED SINKERS:
ONLINE VIA NETWORK:
PTS (POWER TENSION SETTINGS):
LARGE NEEDLE BED RACKING:
STOLL MULTI-TOUCH PANEL:
FRICTION FEED WHEELS
OIL DRAIN CONTAINER
CLAMPING AND CUTTING DEVICE:
INTARSIA YARN CARRIERS
System for measuring and regulating the stitch length in combination with Friction feed wheel
SPRING LOADED SINKERS (except for E3): to improve reliability on local knitting such as deep gores or pockets
CENTRAL LUBRICATION: in order to ensure a reliable maintenance and therefore to ensure a reliable daily production. The automatic central lubrication supplies the needle bed with the necessary needle oil.
FRICTION FEED WHEELS: to ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads.
BATTERY BACK-UP: for a correct continuation of the knitting process after power failure.
NEEDLE: the pelerine spring-transfer needle with spring-loaded latch is characterized by low needle wear and a high level of safety during opening, closing, and transferring.
PTS (POWER TENSION SETTINGS): faster stitch density changes in the fabric. PTS enables different stitch lengths in a single knitting row.
LARGE NEEDLE BED RACKING: the needle bed is equipped with a racking device with a maximum racking course of four inches and a programmable racking speed.
ONLINE VIA NETWORK: with the Ethernet connection STOLL machines can be connected to standard networks for fast transmission of large quantities of data and remote access to other devices.
STOLL MULTI-TOUCH PANEL: the 1366x768-pixel wide view color display with multi-touch screen is practical and clear. The individual user interface and intuitive menu guide enable pattern changes to be entered easily and directly on the machine.
STOLL-MULTIFLEX® FABRIC TAKE-DOWN: the take-down system consisting of a main take-down with adjustable roller segments and take-down comb for fabric starts on empty needles in combination with auxiliary take-down operates automatically.
USB PORTS: thanks to the easy-to-reach USB port, important data can be transferred to the machine quickly and easily.
CLAMPING AND CUTTING DEVICE: individual thread holding via 8 clamping and cutting units on each side depending on the type of the knitting machine.
GAUGE CONVERSION: flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.
AUXILIARY TAKE-DOWN: for a better wide fixing effect of the knitting piece.
Can-Open interface: communication between high-end feed-wheels and STOLL-machines through a CAN-Open interface