To enable knit and wear articles to be knitted with all needles; Racking of the additional beds front/rear: Racking course max. 2
The CMS 730 ki T knit and wear is equipped with additional beds. It offers three systems, a working width of 72" / 183 cm and is available in the gauges E 6.2 and E 7.2. With this machine plain complete articles can be produced with all needles in the gauges E12 and E14. STOLL-multi gauges® areas can also be knitted-in during the process. This enables an interesting interplay of fine areas knitted with all needles and coarser areas knitted only with every second needle. Naturally, coarser complete articles in the gauges E7 and E8 can also be realized with the 1x1 technique.
CMS 730 ki T
knit and wear at its finest
TWO ADDITIONAL TRANSFER BEDS:
MOTORIZED CLAMPING AND CUTTING DEVICE:
2 motorized thread clamping and cutting units (left/right) with 8 independent positions each.
ONLINE VIA NETWORK:
With the Ethernet connection STOLL machines can be connected to standard networks for fast transmission of large quantities of data and remote access to other devices.
The automatic central lubrication supplies the needle bed with the necessary needle oil.
- to ensure a reliable maintenance and therefore to ensure a reliable daily production.
- reduces, optimizes the use of lubricants
The pelerine spring-transfer needle with spring-loaded latch.
Benefits: it is characterized by low needle wear and a high level of safety during opening, closing, and transferring.
PTS (POWER TENSION SETTINGS):
It enables different stitch lengths in a single knitting row.
Benefits: faster stitch density changes in the fabric and thus more pattern possibilities.
Split-stitch without the need of exchanging cams for all fine gauges available
Benefit: Less interruption times in the production
LARGE NEEDLE BED RACKING:
The needle bed is equipped with a racking device with a maximum racking course of 4" and a programmable racking speed.
Benefits: more pattern possibilities
STOLL MULTI-TOUCH PANEL:
The 1366x768-pixel wide view color display with multi-touch screen is practical and clear. The individual user interface and intuitive menu guide enable pattern changes to be entered easily and directly on the machine.
- Improved legibility
- Better usability with capacitive touch (faster display reaction)
- New gestures
- Due to the possibility to access remotely to other devices (e.g. CREATE PLUS, PPS...), changes can be performed directly at the machine
FRICTION FEED WHEELS
8 fold friction feed wheels left and right.
To ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads.
STOLL-MULTIFLEX® FABRIC TAKE-DOWN: main take-down with adjustable roller segments and take-down comb for fabric starts on empty needles in combination with auxiliary take-down operates automatically.
Only in combination with Multiflex take-down
For a better wide fixing effect of the knitting fabric.
OIL DRAIN CONTAINER
With the oil drain container the oil is collected centrally without the need of additional vacuum cleaners or rags to clean the excess oil from the machine.
Consequently, it will be more environmentally friendly.
For a correct continuation of the knitting process after power failure.
Benefits: less damaged fabrics, less waste, less costs.
Thanks to the easy-to-reach USB port, important data can be transferred to the machine quickly and easily.
Flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.
Communication between high-end feed-wheels and STOLL-machines through a CAN-Open interface
System for measuring and regulating the stitch length in combination with Friction feed wheel
Intarsia yarn carriers
Up to 32 Intarsia yarn carriers
TWO ADDITIONAL TRANSFER BEDS
MOTORIZED CLAMPING AND CUTTING DEVIC
FRICTION FEED WHEELS
ONLINE VIA NETWORK
PELERINE SPRING-TRANSFER NEEDLE WITH SPRING-LOADED LATCH
PTS (POWER TENSION SETTINGS)
LARGE NEEDLE BED RACKING
STOLL MULTI-TOUCH PANEL
STOLL-MULTIFLEX® FABRIC TAKE-DOWN