With the Ethernet connection STOLL machines can be connected to standard networks for fast transmission of large quantities of data and remote access to other devices.
From small to extra-large sizes, the CMS 830 ki knit and wear is optimized for the production of a wide range of knit and wear garments.
With a a working width of 84''/213 cm and three systems it is equipped with STOLL-multiflex® take-down and offers a gauge range from E 2,5.2 to E9.2.
It can also be converted to the CMS 830 ki multi gauge.
CMS 830 ki
For a wide range of knit and wear garments
FEATURES
ONLINE VIA NETWORK:
CENTRAL LUBRICATION:
The automatic central lubrication supplies the needle bed with the necessary needle oil.
Benefits:
- to ensure a reliable maintenance and therefore to ensure a reliable daily production.
- reduces, optimizes the use of lubricants
NEEDLE:
The pelerine spring-transfer needle with spring-loaded latch.
Benefits: it is characterized by low needle wear and a high level of safety during opening, closing, and transferring.
PTS (POWER TENSION SETTINGS):
It enables different stitch lengths in a single knitting row.
Benefits: faster stitch density changes in the fabric and thus more pattern possibilities.
SPLIT-STITCH:
Split-stitch without the need of exchanging cams for all fine gauges available
Benefit: Less interruption times in the production
LARGE NEEDLE BED RACKING:
The needle bed is equipped with a racking device with a maximum racking course of 4" and a programmable racking speed.
Benefits: more pattern possibilities
STOLL MULTI-TOUCH PANEL:
The 1366x768-pixel wide view color display with multi-touch screen is practical and clear. The individual user interface and intuitive menu guide enable pattern changes to be entered easily and directly on the machine.
Benefits:
- Improved legibility
- Better usability with capacitive touch (faster display reaction)
- New gestures
- Due to the possibility to access remotely to other devices (e.g. CREATE PLUS, PPS...), changes can be performed directly at the machine
FRICTION FEED WHEELS
8 fold friction feed wheels left and right.
To ensure a reduced, constant thread tension. An optimum yarn supply device for a maximum number of threads.
TAKE-DOWN:
STOLL-MULTIFLEX® FABRIC TAKE-DOWN: main take-down with adjustable roller segments and take-down comb for fabric starts on empty needles in combination with auxiliary take-down operates automatically.
AUXILIARY TAKE-DOWN:
Only in combination with Multiflex take-down
For a better wide fixing effect of the knitting fabric.
OIL DRAIN CONTAINER
With the oil drain container the oil is collected centrally without the need of additional vacuum cleaners or rags to clean the excess oil from the machine.
Consequently, it will be more environmentally friendly.
CLAMPING AND CUTTING DEVICE:
ndividual thread holding via 8 clamping and cutting units on each side of the machine.
Benefits:
- easier and faster pattern programming
- more productivity in some fabrics
BATTERY BACK-UP:
For a correct continuation of the knitting process after power failure.
Benefits: less damaged fabrics, less waste, less costs.
USB PORTS:
Thanks to the easy-to-reach USB port, important data can be transferred to the machine quickly and easily.
GAUGE CONVERSION:
Flexible and economical adjustment of machine gauge by means of gauge conversion or needle exchange.
CAN-OPEN INTERFACE:
Communication between high-end feed-wheels and STOLL-machines through a CAN-Open interface
ACCESSORIES
DEVORÉ KIT
Set of parts for knitting devoré patterns.
PLUSH DEVICE
Set of parts for knitting plush patterns.
Intarsia yarn carriers
Up to 32 Intarsia yarn carriers
ASCON
System for measuring and regulating the stitch length in combination with Friction feed wheel